Question: Why Is My Fibe TV Not Working?

Why is my PVR not working?

When you set a recording and it failed to record, try the following troubleshooting steps to see if you can resolve the issue: Ensure that all cables plugged into your Digital PVR set-top box are secure and tight.

Test the issue by recording a new program.

Ensure that you watch the same program you’re recording..

How do I fix my Bell Internet?

Connection HubOn your modem, locate the power cable.Remove the cable. Wait 10 seconds and reinsert the cable.The lights on the front (except for the power LED) will blink as the modem goes through its start-up routine.Wait until the WAN, INTERNET and TV lights turn blue. Your modem is now connected to the Internet.

How do I reset my modem online?

To reboot your modem and your WiFi router:Unplug the power cord from the back of the modem and remove any batteries.Unplug the power cord from the WiFi router.Wait 60 seconds, and then reinsert any batteries and reconnect power to the modem.Wait at least two minutes to allow the modem to power up.More items…

How do I turn on my Bell Fibe receiver?

How to activate your wireless HD receiverOnce you see the Fibe TV activation screen, press select to begin the activation.Select the desired language.Select Activate.Once activation is completed, press select to restart your wireless receiver.Your wireless receiver is now restarting. … Once your Wireless receiver has restarted, you are ready to use Fibe TV.

Why is my Bell Internet not working?

Turn off or unplug your Bell Internet High Speed modem. Turn off or unplug your router. … Turn your modem and router back on and wait until all the lights are lit again. Try surfing the Internet.

How do I reset my bell receiver?

Press and hold-down the green POWER button on the front of your TV receiver for 5 seconds (until the red, green, and blue lights come on). Wait a few minutes for the reboot to take place. You may see a black screen during this time.

How do I reboot my receiver?

To reset your receiver:Unplug the receiver’s power cord from the back of the receiver or from the wall outlet.Leave unplugged for 30 seconds and plug back in.The receiver should boot up properly in less than 90 seconds.

How do I reset my Bell Fibe Internet?

Press and hold the Reset button on the side of the modem for 5 seconds. Wait until all 3 LED lights are white and Fibe Internet: Connected is displayed.

Why is my Bell Fibe TV not working?

Unplug the power cable on the back of the Fibe TV receiver. … Wait approximately five minutes for the Fibe TV receiver to restart. Once the Fibe TV receiver has restarted, check to see if your TV picture has returned and the Fibe TV receiver responds to the remote control.

Why does my Bell internet keep cutting out?

When too many Wi-Fi connections are present, the router may become stressed and start dropping connections. Heavy downloading and online gaming for example may cause the router to become overloaded with data, and therefore fail temporarily. Always use a router that is designed for your needs.

Why is Internet not working today?

If your internet is slow or not working today, you can blame it on Cyclone Vardah. … YOU Broadband, which offers services in 16 cities, said “two major internet gateways” were affected by the cyclone. ACT Broadband warned users about connectivity issues for at least a day.

How do I reboot my Shaw receiver?

How to reset your receiverUnplug the power cord from the back of the receiver.Leave it unplugged for 30 seconds, then plug it back in.The receiver should boot up properly in less than 90 seconds, with lights flashing in front.